|
Non-shunted, T8-T12 low profile, 22mm lamp axis, lamp holder with push fit/ slide on mounting. Palnut and Screw sold seperately, see 365AP and 365DPH. Link to T8, T10, or ... Part No: 72372 - Volume discount
- 20% off 500 units: -$2.39
|
LH0450 HH 125-7 Starter base lamp holder with two hole bracket ... Part No: 70506 |
The LH0058 H.H. Fluorescent 413 is an unshunted, T8/T10/T12 dual socket fluorescent lamp holder is made from polycarbonate and is UL and CSA listed. The LH0058 H.H. Fluorescent 413 has a mounting style of butt on - screw mount and an overall height of 1.296 inches. The LH0058 H.H. Fluorescent is equal to the American DeRosa D3947. Link to ... Part No: 70114 |
LH0011 HH 1-450W-2A , non-shunted, G5 minaiture bipin lampholder, T5 fluorescent socket, with a long bracket, clearance hole for 1/8 rivet, 75w-660v, 9 inch leads. The LH0011 is comparable or equal to the American DeRosa D3957, DM Y94, 857018, Golo T501, HH Fluorescent: 1-450-2A, Satco 80-1251 and the Triboro: 659A-6V-1341. Link to T5 ... Part No: 70067 |
The LH0003 (HH 1-726W) is a tombstone socket medium bipin (G13) lamp holder, it is flush mount with an untapped center hole. The 1-726W is non-shunted and a butt on mounting type. the LH0003 H.H. Fluorescent 1-726W is comparable or equal to the ALP 208, DM: Y68-9, 85614, Golo SC600 and the Triboro 645A-6. Link to T8, ... Part No: 70059 |
The LH0010 (HH 1-500W-C) is a G13 medium bipin socket. This lamp holder is non-shunted, butt-on mounted and has 9 inch leads.The LH0010 is comparable or equal to the American DeRosa D2653, DM Y68L, 85862, HH Fluorescent 1-500W-C, Leviton 395-W and the Triboro: 637-A. Link to T8, ... Part No: 70066 |
Unshunted, T8-T12 lamp holder with bracket tapped hole mounting Link to T8, T10, ... Part No: 70554 |
The LH0325 HH Fluorescent 1329 2G11 base CFL horizontal lampholder (socket) made of polycarbonate and has a lamp release button on top. It is rated at 600 watts and 600 volts. The LH0325 HH Fluorescent 1329 has quick wire connectors for 18AWG wires. It is equal to the BJB 26.746 ... Part No: 70381 |
The LH0165 tombstone lamp holder is a nonshunted, stationary (female) end, push fit or screw down HO lamp holder. The LH0165 fits RDC R17d lamp bases and has ratings of 660w - 600v for HO and VHO fluorescent and LED lamps. It is made of thermoplastic and is cULus certified. The LH0165 can replace the D3944 from American DeRosa, the DM38-19 58819 from DM Technology, the 1-810H ... Part No: 70221 |
Unshunted, T8-T12 lamp holder with un-tapped center hole and butt on mounting Link to T8, T10, ... Part No: 70595 |
The LH0142 H.H.FL. 127 is a shunted, butt-on, screw mount, stationary Fa9 slimline button lamp holder/socket. The LH0142 H.H.FL. 127 is made of thermoplastic and has a height of 1.063 ... Part No: 70198 |
Unshunted, V lock, T5 lampholder with through hole bracket mounting Link to T5 lamps that this support ... Part No: 70452 |
Unshunted, spring or stationary mount HO/VHO socket for turret assemblies Link to HO T10 1500mA, ... Part No: 70389 |
The LH0025 HH Fluorescent 1-526SW is a lamp holder socket that is non-shunted and is for T8, T10, T12, G13 medium bipin base fluorescent lamps. It is a slide on "V" lock tombstone, socket for 20 gauge or less fixtures, 660w-600v, and 30.2mm lamp axis. It is also cULus and CSA certified. Link to T8, ... Part No: 70081 |
The LH0141 H H 128 lamp holder is a shunted, butt-on, screw mount, compressible slimlinebutton lamp holder. It is a H.H. Fluorescent 128 model that fits Fa8 single pin lamp bases. The LH0141 H H 128 has a rating of 660w - 1000v and is made of thermoplastic. It has a screw mount style mounting and uses #18 awg 11in. 105'c 600v leads. It has an overall height of 2.125". ... Part No: 70197 |
The LH0166 HH-1-811H tombstone lamp holder is a non-shunted, plunger (male) end, push fit LED or fluorescent HO, VHO lamp holder. The LH0166 fits RDC R17d lamp bases and has ratings of 660w - 600v for HO fluorescent and LED lamps. It is made of thermoplastic and is cULus certified. It is typically used in commercial and industrial lighting applications. The LH0166 HH-1-811H is similar or equal ... Part No: 70222 |
Shunted, compressible w/springs, slimline turret assembly lamp ... Part No: 70428 |
Shunted, slide on or screw down mounting T8 to T12 med bipin lamp holder Link to T8, T10, ... Part No: 70450 |
Unshunted, stationary end HO/VHO socket w/ push fit mntng & vert. contacts Link to HO T10 1500mA, ... Part No: 72780 |
The LH0090 HH Fluorescent 1-926SW-2 is a lampholder tombstone socket that is unshunted and can be slid on or screwed down. It is made of polycarbonate and is UL and CSA listed. It is designed to fit G13 medium bipin lamp bases for T8, T10, T12 fluorescent lamps and has a rating of 660w - 600v. The LH0090 HH Fluorescent 1-926SW-2 has a quick connect wiring method and an ... Part No: 70146 |
The LH0162 H.H. Fluorescent 1-315 tombstone lamp holder is a shunted, plunger (male) end, push fit or screw down slimline lamp holder. The LH0162 H.H. Fluorescent 1-315 fits Fa8 single pin lamp bases and has ratings of 660w - 600v for slimline fluorescent and LED lamps. It is made of thermoplastic and is cULus certified. The LH0162 is equal or comparable to the DM DM38-28, 855282, HH ... Part No: 70218 |
Unshunted, medium bipin lamp holder for turret assemblies Link to T8, T10, ... Part No: 70439 |
Two light medium bipin turret lampholder set (both stat. and compressible ends) Link to T8, T10, ... Part No: 70626 |
LH0530 HH 125-5 Starter base socket with spring clip ... Part No: 70586 |
The LH0026 H.H.1-1126SW-1-2 tombstone, socket is non-shunted and fits G13 medium bipin T8, T10 and T12 fluorescents. It can be slide on or screw down. Non-shunted G13 medium bipin for T8, T10 and T12 fluorescents Link to T8, ... Part No: 70082 |
Non-shunted G13 medium bipin T8-T12 linear and U lamp ... Part No: 70084 |
The LH0030 HH 1-1805 is unshunted tombstone socket and fits G13 medium bipin lamp bases. It has a rating of 660w - 600v and is made of polycarbonate.The LH0030 HH 1-805 does not have a stop (locator pin) and has a 31mm lamp axis to accomodate T10 and T12 linear fluorescents as well as T8's. Link to T8, ... Part No: 70086 |
The LH0035 HH Fluorescent 1-1226SW-2 is a non-shunted tombstone lamp holder socket that is compatible with G13 medium bipin T8-T12 fluorescent lamps. It is made of polycarbonate and has a height of 1.65 inches. It is also cULus and CSA listed. It is similar or equal to theAmerican DeRosa D2686, DM Y98l, Kulka: 1600, Pass & Seymour 13053 and Sato: 80-1254. Link to ... Part No: 70091 |
The LH0053 HH 1450RW-10 lamp holder is unshunted and has an attached starter base. It fits G13 medium bipin lamp bases and has a starter rating of 660w - 600v. The LH0053 HH 1450RW-10 is made of polycarbonate and is UL and CSA listed. It has a screw down mounting style and quick connect wiring. Link to T8, ... Part No: 70109 |
The LH0054 HH 926RW-2 tombstone lampholder is made of polycarbonate and is designed for T8/T10/T12 lamps. It has a screw down mounting style and quick connect wiring. The LH0054 HH 926RW-2 is unshunted and has a height of 1.812 inches. Link to T8, ... Part No: 70110 |
Unshunted, T8 only bolt down linear fluorescent lamp ... Part No: 70111 |
The LH0161 H.H. Fluorescent 1-314 tombstone lamp holder is a shunted, stationary (female) end, push fit or screw down slimline lamp holder. The LH0161 H.H. Fluorescent 1-314 fits Fa8 single pin lamp bases and has ratings of 660w - 600v for slimline fluorescent and LED lamps. It is made of thermoplastic and is cULus certified. The LH0161 is equal or comparable to the DM, DM38-27, 855272, HH ... Part No: 70217 |
2G11 base CFL horizontal lamp support with center hole ... Part No: 70379 |
Unshunted, T8-T12 stationary, push fit or screw down lamp holder Link to T8, T10, ... Part No: 70406 |
The LH0056 HH Fluorescent 1-526W-2 lampholder socket is a T8/T10/T12 G13 medium bipinbolt down linear fluorescent tombstone lamp holder. It is made of polycarbonate and is UL and CSA listed. The LH0056 HH Fluorescent 1-526W-2 has a screw down mounting style, "V" lock, unshunted and has a quick connect wiring method. It is 2.063 inches tall. Link to ... Part No: 70112 |
Non-shunted, G13 medium bipin, slide on-screw down, straight insertion, T8-T12 fluorescent tombstone  ... Part No: 70141 |
Shunted, screw down, tombstone, stationary slimline lamp ... Part No: 70182 |
Unshunted, V lock, T5 lamp holder with butt on mounting Link to T5 lamps that this support ... Part No: 70400 |
Unshunted, T8-T12 compressible, push fit or screw down lamp holder Link to T8, T10, ... Part No: 70407 |
Shunted, push fit, medium bipin lamp holder with stop/postLink to T8, T10, ... Part No: 70413 |
Unshunted, HO/VHO lamp holder for turret assemblies Link to HO T10 1500mA, ... Part No: 70423 |
Unshunted, HO/VHO lamp holder for turret assemblies Link to HO T10 1500mA, ... Part No: 70424 |
Shunted, rotary locking, push fit med bipin lamp holder with stop/post Link to T8, T10, ... Part No: 70426 |
Shunted, stationary, slimline turret assembly lamp ... Part No: 70429 |
Unshunted, rotary locking push fit med. Bipin lamp holder w/o stop/post, 30.2 mm lamp axis Link to T8, T10, ... Part No: 70441 |
Two lamp slimline turret assembly (both compressible and stationary ... Part No: 70518 |
Two lamp HO/VHO turret assembly (both compressible and stationary ends) Link to HO T10 1500mA, ... Part No: 70527 |
The LH0156 H.H. 526RW-10 is unshunted, has a "V" lock, and is screw mounted. It fits G13 Medium bipin, starter bases, and has a rating of 660w - 600v. The LH0156 H.H. 526RW-10 is made of thermoplastic and is UL and CSA listed and is for fluorescent and LED lamps. ... Part No: 70212 |
G23 and 2G7 base CFL horizontal lamp support with center hole ... Part No: 70377 |
Unshunted, center tapped, lamp holder with butt on mounting Link to T8, T10, ... Part No: 70542 |
HH Fluorescent LH0492 1326RW-2Disconnect T8-T12 fluorescent lamp holder with push fit or slide on mounting Disconnect T8-T12 fluorescent lamp holder with push fit or slide on mounting Link to T8, T10, ... Part No: 70548 |
Unshunted, T8-T12 medium bipin lamp holder with slide on or screw mounting Link to T8, T10, ... Part No: 70588 |
Unshunted, V locking, T8-T12 lamp holder with screw down mounting Link to T8, T10, ... Part No: 70594 |
Three lamp bipin turret assembly (both compressible and stationary ends) Link to T8, T10, ... Part No: 70661 |
Shunted, T8-T12 lamp holder with slide on and push fit mounting Link to T8, T10, ... Part No: 70686 |
Shunted, straight insertion, lamp holder with slide on ... Part No: 72807 |
Unshunted, compressible end HO/VHO socket w/ push fit mntng & vert. contacts Link to HO T10 1500mA, ... Part No: 72781 |
Shunted, 4 lamp slimline single pin turret assembly (both stat. & comp. ... Part No: 74129 |
HH Fluorescent LH0324 2G11, PLL, Long Twin Tube, horizontal, lamp support2G11, PLL, Long Twin Tube, horizontal, lamp support, circular hole mount, 21.8mm 2G11 base CFL horizontal lamp support with round foot mounting. 21.8 mm lamp ... Part No: 70380 |
2G11 base CFL horizontal lamp holder with snap in mounting and press release Link to 2G11, Long twin tube, Biax, PLL lamps that fit this ... Part No: 70384 |
Unshunted, G10q circline lamp holder with push fit ... Part No: 72535 |
Unshunted, rotary locking, push fit lampholder with ... Part No: 70093 |
G23, GX23, 2G7 & 2GX7 base CFL lamp support w/bottom split ... Part No: 70375 |
5,7,9 & 11w G23, 2pin CFL socket with two hole horizontal ... Part No: 70430 |
Three lamp slimline turret assembly (both compressible and stationary ... Part No: 70528 |
3 lamp HO/VHO turret lampholder set (both stationary & compressible ends) Link to HO T10 1500mA, ... Part No: 70649 |
Four light bipin turret socket pair (compressible and stationary ends) Link to T8, T10, ... Part No: 72819 |
Unshunted, 4 light HO/VHO turret assembly (compressible & stationary ends) Link to HO T10 1500mA, ... Part No: 73318 |
Non-shunted, converts T8/T12 fixtures to T5. Plunger end, mates to LH1118. ... Part No: 70044 |
Medium bipin screw down disconnect socket Link to T8, T10, T12, ... Part No: 75601 |
Discontinued, please see LH0058 as possible ... Part No: 70106 |
Discontinued see ... Part No: 70115 |
Non-shunted. converts T8/T12 fixtures to T5. Stationary end, mates to LH1117. ... Part No: 70045 |
Linear fluorescent T8/T10/T12 medium bipin polycarbonate ... Part No: 70080 |
Unshunted linear fluorescent T8/T10/T12 medium bipin lampholder with flexible wings ... Part No: 70100 |
Discontinued see ... Part No: 70108 |
Discontinued Part No: 70142 |
Obsolete, new part number is ... Part No: 70145 |
Discontinued see ... Part No: 70172 |
Discontinued see ... Part No: 70181 |
Discontinued see ... Part No: 70199 |
Discontinued see ... Part No: 70200 |
|
Discontinued see ... Part No: 70113 |
Discontinued see ... Part No: 70202 |
Discontinued see ... Part No: 70203 |
Discontinued see ... Part No: 70204 |
Discontinued see ... Part No: 70343 |
Unshunted, slide on T slot or screw down vertical contact ... Part No: 70344 |
CFL 2-pin 5w, 7w, 9w & 11w ... Part No: 70376 |
CFL 4-pin Biax or Long Twin Tube ... Part No: 70382 |
Linear fluorescent T8 only medium bipin ... Part No: 70443 |
Unshunted, V lock lampholder with tapped center hole and screw down ... Part No: 70551 |
Discontinued by mfr. ... Part No: 70639 |