100 watt 24Vdc constant voltage LED ...
Part No: 75627
105 watt, 48Vdc constant voltage, 3130mA constant current LED ...
Part No: 75610
650 lumen 13w 2pin, 500 lumen 9w 2pin, or 350 lumen 7w 2pin emergency ...
Part No: 75603
0 - 10v Dimmable, 20w, 700mA constant current LED ...
Part No: 75602
Fulham FHSAC1-UNV-40C LED driver with integrated emegency backup, 40w, 250 - 1400mA ...
Part No: 75600
High Perfection LP1017-24 17 watt, 24Vdc constant voltage LED power ...
Part No: 75598
Thomas Research LED25W-40-C0620-D 25 watt, 13-40Vdc, 620mA, dimmable LED ...
Part No: 75597
Medium bipin screw down disconnect ...
Part No: 75601
Thomas Research PLED96W-137-C0700-D 96w 700mA constant current, dimmable 46 - ...
Part No: 75599
ElectraLED (Schott-Gemtron) 44SG-6-40R-RU Right side 6 foot 400k LED freezer ...
Part No: 75596
Hill Phoenix 48 inch, 3500k, Clearvoyant 4 LED specialty ...
Part No: 75595
Dimmable, 750mA, 26 - 40Vdc, constant current, 30 watt LED ...
Part No: 75593
Dimmable 150 watt, 120vac - 12Vac ...
Part No: 75594
Dimmable, 1200mA, 41 - 54Vdc, constant current LED ...
Part No: 75592
500 lumen fluorescent emegency ballast for one 2-4' single, bipin, T8-T12 or one 2-4' 28w T5 The I32 from IOTA Engineering is a UL Listed fluorescent emergency ballast that allows the same fixture to be used for both normal and emergency operation. In the event of a power failure, the I32 switches to the emergency mode and operates one of the existing lamps for 90 minutes. The unit contains a ...
Part No: 75579
150 watt, 12Vac, dimmable, incandescent  halogen ...
Part No: 75581
Hill Phoenix P105958E 48", 3000k, Clearvoyant 4 LED canopy ...
Part No: 75578
This driver will operate any LED module designed to accept an input voltage of 12 - 55Vdc and up to 700mA. Battery sold separately. ...
Part No: 75570
Hill Phoenix P088637KBK 4 pin connector for LED shelf ...
Part No: 75572
Hill Phoenix P096376ABK Black, 4 receptacle case ...
Part No: 75571
Hill Phoenix P106003G 48", 4000K, 12.7 watt, HO canopy LED ...
Part No: 75573
Hera STICK2/8/CW 8", 1.6W cool white miniature LED ...
Part No: 75574
LED battery pack for FHS2-UNV-36L (16 watt), FHS2-UNV-56S (14 watt) FireHorse HotSpot2 is a UL924 recognized emergency lighting system useable with LED modules driven by a constant current source. The battery charger automatically adjusts to the battery size and use. With the proper connector, the driver provides output current based on the module connected, allowing a wide choice of lumen ...
Part No: 75569
40w 2000ma constant current, 9-18Vdc, LED ...
Part No: 75567
60w 24Vdc constant voltage LED driver with AC plug and DC connector OWA-60U is one 60W single-output esternal LED power supply series. Pairing the North American type of AC plug and the prevailing DC connectors, OWA-60U working like an adapter, simplifies the connection with LED lighting fixtures without extra wiring efforts. The entire series is certified with the UL LISTED for dry and ...
Part No: 75568
T5 or 2G11 swivel lamp ...
Part No: 75564
T5 miniature bipin, unshunted, rotary locking with rear split pins and ...
Part No: 75565
50w 1250mA constant current dimmable LED driver ...
Part No: 75560
Unshunted, T5 miniature bipin, rotary locking with base split ...
Part No: 75562
Unshunted, rotary locking, 13mm thick, lamp holder with rear split pin mounting and ...
Part No: 75563
40 watt, candelabra base (E12), clear torpedo shape ...
Part No: 76657
HavellsHavells
40B10.5/MED/IF/3M-1... 40 watt, medium base, frosted, torpedo shape, incandescent40 watt, medium base, frosted, torpedo shape, incandescent
40 watt, medium base, frosted, torpedo shape, ...
Part No: 76658
40 watt, flame tip, candelabra base (E12), clear ...
Part No: 76659
LED Driver 900ma Constant Current ...
Part No: 75557
96w, 24Vdc, constant voltage, 170mm long, with bushings at each end, 100-277Vac, ...
Part No: 75556
3 watt, 12 Vdc constant voltage Led ...
Part No: 75558
Clear 3 watt, candelabra base, G16.5 LED globe ...
Part No: 77163
15 watt, 220 volt, E14 Euro-Candelabra base ...
Part No: 76640
12 watt 350ma constant current dimmable LED power ...
Part No: 75554
120V ballast for one G4S11 ...
Part No: 75555
Hill Phoenix case harness with four recptacle ...
Part No: 75553
48w, 1150mA constant current LED driver 0-10V dimmable, bottom stud connection. ...
Part No: 75552
Tall T8/T12 rotary locking un-shunted lamp holder with ...
Part No: 71127
LED Driver 20w 830ma constant current 24v ...
Part No: 70000
Emergency operation for lamps Slim Low profile, 1300 ...
Part No: 75550
Dimmable, 18w, 400mA constant current, 27 - ...
Part No: 75551
Energy Pro TLE6 55 FC55T9 (55w) circline fluorescent ballast with socket ...
Part No: 75548
3 prong Kysor Warren case ...
Part No: 75547
48watt, two step dimming, 1240mA constant current, 18 - 39Vdc Two step dimming: 50% ON first, then 100% on if AC/cycles in < than 1.2 sec. ...
Part No: 75546
Low Profile emergency operation for Linear and CFL ...
Part No: 75545
Hill Phoenix P110907E Adapter for Clearvoyant 4 to Clearvoyant 2 LED ...
Part No: 75543
Hill Phoenix LED fixture mounting ...
Part No: 75539
Hill Phoenix P105981F (P086602B) 48 inch, 3000K, Clearvoyant 4 LED display case canopy  ...
Part No: 75544
Hill Phoenix Clearvoyant 4 48" high output, 3500K, LED canopy ...
Part No: 75536
Hill Phoenix P109002F rotation ring clip for Clearvoyant 4 LED ...
Part No: 75542
Hill Phoenix P109003D left hand (non-power end) Clearvoyant 4 rotation ...
Part No: 75540
Hill Phoenix P109004B right hand (power end) Clearvoyant 4 rotation ...
Part No: 75541
24Vdc constant voltage, 3330mA 120vac LED driver The XLAV is a UL Class II, constant voltage, phase dimmable, LED driver, capable of providing full range, 5-100% smooth, flicker-free dimming. Tested with over 70 dimmer brands on the market, this unit works with both forward/reverse phase (TRIAC/ELV) type dimmers, and is unsurpassed in dimmer compatibility and performance. Patent pending, ...
Part No: 75538
78 inch extrusion for Hera TapeUltra-LED LED tape ...
Part No: 75485